Supported Protocols
• Modbus TCP/IP
• CANbus (internal device and subsystem communication)
Availability and feature access depend on firmware version and system configuration.
Modbus Overview
Modbus TCP enables read/write access to selected system registers, including:
• Aggregate power measurements
• Circuit-level status
• Import/export values
• Battery and DER state indicators
Modbus access is typically read-only by default unless explicitly enabled.
CANbus Overview
CANbus is used for:
• Internal communication with Powerblocks and other subsystems
• Real-time control signaling
• Low-latency device coordination
CANbus wiring and termination must follow Kora and device-specific guidelines.
Important Notes
• Improper Modbus or CANbus configuration can affect system stability
• Do not connect third-party controllers without approval
• Always document protocol settings for future service