Skip to main content

Setting Up Kora With Your Utility (Rule 21, IEEE 1547, etc.)

Meet Interconnection Requirements Automatically Kora is designed to comply with modern utility interconnection standards, including IEEE 1547 and California Rule 21. These settings control how Kora interacts with the grid.

Written by Paige Tranchina
Updated over 2 months ago

During Initial Setup

  1. In the Kora app, select your Utility Provider.

  2. Choose your Region / State.

  3. The system automatically applies the correct grid profile.

What Kora Configures Automatically

  • Voltage and frequency ride-through

  • Anti-islanding protection

  • Export limits (if required)

  • Grid response behavior

These settings are locked once applied to maintain compliance.

Inspector and Utility Notes

  • Kora stores applied grid profiles internally.

  • No manual DIP switches or field programming required.

  • Profiles align with UL 1741 SA and IEEE 1547 requirements.

Did this answer your question?